Your guillotine is sitting in a drawer at home, and you’re at a friend’s backyard with a fresh cigar and no way to open it. That’s the moment a punch cutter earns its spot on your keychain. It’s small enough to carry everywhere, nearly impossible to mess up, and it gives a cooler, more concentrated draw than a straight cut.

Punches aren’t all the same, though. Hole size, blade quality, and whether it has one size or several decide how well it works on the cigars you actually smoke. This guide covers six options, from lifetime-warranty Xikars to multi-size and multi-tool picks.
Find Your Pick in 30 Seconds
- Best overall keychain punch: Xikar Pull-Out Punch. 9mm stainless blade, keychain ring, lifetime warranty.
- Best for big ring gauges: Xikar 10mm Punch. Larger 10mm hole for a fuller draw on gordos and toros.
- Best two-pack with two sizes: Colibri Firebird Punch 2 Pack. 7mm and 10mm blades in rubberized keychain bodies.
- Best dual-size single punch: LIHTUN Dual-Size Punch. Twist to pick a large or small hole.
- Best punch multi-tool: KEENSUN 3-in-1 Punch Tool. 8mm punch plus a draw enhancer and nubber.
- Best budget punch: Vertigo Striker Cigar Punch. Simple metal keychain punch at an impulse-buy price.
Quick Comparison Table
| Best For | Product | Hole Size | Warranty | Price Range |
|---|---|---|---|---|
| Best Overall | Xikar Pull-Out Punch | 9mm | Lifetime | ~$15 to $20 |
| Big Ring Gauges | Xikar 10mm Punch | 10mm | Lifetime | ~$20 to $30 |
| Two-Pack, Two Sizes | Colibri Firebird 2 Pack | 7mm and 10mm | Colibri standard | ~$20 to $35 |
| Dual-Size Single | LIHTUN Dual-Size | Two sizes | Limited | ~$10 to $20 |
| Multi-Tool | KEENSUN 3-in-1 | 8mm | Limited | ~$10 to $20 |
| Budget | Vertigo Striker | Single size | Limited | ~$5 to $12 |
What to Know Before You Buy
A punch is simple, but a few details make the difference between a clean draw and a frustrating one.
match the hole size to your cigars
Punch holes usually run from about 7mm to 12mm. A 7mm or 8mm hole suits coronas and robustos. A 9mm hole is the all-around middle. For 56 ring gauge and up, a 10mm or larger hole keeps the draw from feeling too tight. If you smoke a wide range, a dual-size punch or a two-pack with different sizes covers it all.
punches only work on round heads
A punch needs a flat, rounded cap to bore into. Torpedos, belicosos, and other pointed shapes need a guillotine. That’s why a punch works best as your carry cutter, with a guillotine at home for everything else.
blade quality decides how clean the hole is
A sharp stainless blade cuts a clean circle and lifts the plug right out. A dull blade tears the cap and leaves ragged tobacco that can catch on your lip. Brands like Xikar and Colibri hold an edge longer, and Xikar’s lifetime warranty means a dull blade gets replaced instead of thrown away.
watch for tar on long smokes
A small hole concentrates smoke, which is the appeal. It also collects tar and moisture over a long cigar, and the last third can turn bitter. On a smoke longer than about 45 minutes, a second punch next to the first or a quick straight cut freshens things up.
The 6 Best Cigar Punch Cutters Reviewed
Each pick below lists hole size, warranty, and who should skip it.
1. Xikar Pull-Out Punch
Price: about $15 to $20 | Hole: 9mm | Blade: stainless steel | Carry: keychain | Warranty: lifetime
The Xikar Pull-Out Punch is the standard recommendation for a reason. Pull the body apart to expose a razor-sharp 9mm stainless blade, press and twist into the cap, then push the blade back to pop the plug out. The 9mm hole works on most robustos and toros, and it lives on your keys so it’s always with you.
Xikar’s lifetime warranty covers it, so if the blade ever dulls, it gets repaired or replaced.
| Pros | Cons |
| ✓ Sharp 9mm stainless blade | ✗ One hole size only |
| ✓ Lifetime warranty | ✗ Can feel tight on 60 RG cigars |
| ✓ Small enough for any keychain |
Skip this if you mostly smoke big ring gauges. The 10mm version gives a fuller draw.
2. Xikar 10mm Punch
Price: about $20 to $30 | Hole: 10mm | Finish: gold | Warranty: lifetime
This is the Xikar punch for smokers who reach for gordos and thick toros. The 10mm hole opens up more of the cap, so the draw stays easy on a 56 to 60 ring gauge cigar where a 9mm punch can feel restrictive. It carries the same Xikar lifetime warranty.
On thinner cigars, 10mm takes a big share of the cap, so pair it with a smaller punch if you smoke a mix.
| Pros | Cons |
| ✓ 10mm hole suits big ring gauges | ✗ Too large for thin cigars |
| ✓ Lifetime warranty | ✗ Costs more than the 9mm |
| ✓ Gold finish makes a nice gift |
Skip this if you smoke mostly coronas and robustos. The 9mm is the better fit.
3. Colibri Firebird Punch 2 Pack
Price: about $20 to $35 for two | Holes: 7mm and 10mm | Body: rubberized | Carry: keychain
Two Colibri keychain punches in one box, with 7mm and 10mm stainless blades between them. That covers thin cigars and thick ones without carrying a multi-tool. The rubberized bodies grip well and won’t scratch your phone in the same pocket.
Keep one on your keys and one in the car or golf bag, or split them with a friend.
| Pros | Cons |
| ✓ Two hole sizes in one purchase | ✗ Shorter warranty than Xikar |
| ✓ Rubberized grip | ✗ Two separate tools to carry |
| ✓ Trusted brand |
Skip this if you want one punch that does both sizes. The LIHTUN dual-size is a single tool.
4. LIHTUN Dual-Size Punch
Price: about $10 to $20 | Holes: large and small | Design: twist-out | Blade: stainless steel
The LIHTUN puts two punch sizes in one body. Twist it one way for the small blade and the other way for the large one. It’s a tidy solution if you smoke both thin and thick cigars and don’t want two punches on your keys.
It doesn’t carry a big-brand warranty, but at this price it’s an easy, low-risk upgrade over a single-size punch.
| Pros | Cons |
| ✓ Two sizes in one tool | ✗ Limited warranty |
| ✓ Low price | ✗ Slightly bulkier than a single punch |
| ✓ Several finishes available |
Skip this if a lifetime warranty matters to you. Xikar is the one to buy.
5. KEENSUN 3-in-1 Punch Tool
Price: about $10 to $20 | Hole: 8mm | Extras: draw enhancer, twin nubber | Materials: aluminum and stainless steel
The KEENSUN combines an 8mm punch with a draw enhancer, a thin tool that clears a plugged cigar, and a twin nubber that lets you hold the last inch of a cigar without burning your fingers. It’s three useful tools in one slim body.
The draw enhancer alone can save an expensive cigar that’s rolled too tight, which makes this a smart second tool even if you already own a cutter.
| Pros | Cons |
| ✓ Punch, draw enhancer, and nubber | ✗ 8mm is small for big ring gauges |
| ✓ Fixes plugged cigars | ✗ Limited warranty |
| ✓ Low price |
Skip this if you only want a punch. A dedicated Xikar is simpler and sharper.
6. Vertigo Striker Cigar Punch
Price: about $5 to $12 | Hole: single size | Finish: gunmetal | Carry: keychain
The Vertigo Striker is the cheapest way to get a metal keychain punch. It does the basic job well, and at this price you can keep one in every bag, glovebox, and jacket.
Don’t expect the blade to stay as sharp for as long as a Xikar. Treat it as a backup you won’t mind losing.
| Pros | Cons |
| ✓ Very low price | ✗ Blade dulls sooner |
| ✓ Metal body | ✗ Single size |
| ✓ Easy to stash everywhere |
Skip this if it would be your only cutter. Spend a little more on the Xikar.
Buyer’s Guide
A few more tips to get the most from a punch.
how to punch a cigar cleanly
- Center the blade on the flat top of the cap.
- Press gently and twist until the blade sinks about 1/8 inch.
- Pull straight out and eject the plug.
- Take a cold draw. If it’s tight, add a second punch beside the first.
keep the blade clean
Tobacco bits and tar build up inside the barrel. Eject the plug every time, and clean the blade now and then with a cotton swab and a little rubbing alcohol. A clean blade cuts a cleaner hole.
a punch and a guillotine work best together
A punch handles most straight cigars on the go. A guillotine handles torpedos, thin cigars, and anything a punch can’t. If you’re building out your kit, the full cigar cutter roundup covers guillotines, V-cutters, and desktop cutters.
some lighters have a punch built in
Several torch lighters include a punch in the base, which can save you a separate purchase. The cigar lighter rankings include a Xikar model with a built-in punch.
Common Questions About Cigar Punches
Quick answers to what people ask most.
what size punch should i get?
9mm if you want one size for most cigars. Go 10mm or larger for gordos, and 7mm to 8mm for coronas and thinner sticks. A dual-size punch or a two-pack covers everything.
can i punch a torpedo?
No. A punch needs a flat, rounded cap. Use a guillotine on the tip of a torpedo or belicoso instead.
why does my punched cigar draw too tight?
The hole may be too small for the ring gauge, or the blade didn’t go deep enough. Add a second punch next to the first, or switch to a larger size.
can i take a punch cutter on a plane?
Rules on small blades change and vary by country and airline. Check current TSA and airline guidance before you fly, or pack it in checked luggage to be safe.
The Right Punch for You
For one punch that handles most cigars and lasts for life, get the Xikar Pull-Out Punch. If you smoke big ring gauges, the Xikar 10mm Punch keeps the draw open.
For both sizes in one purchase, the Colibri Firebird 2 Pack is the brand-name pick, and the KEENSUN 3-in-1 adds a draw enhancer for rescuing plugged cigars.
jay
Self proclaimed cigar expert. I've been smoking since 2010. I've practically lived at a cigar lounge from 10am to 10pm and trying every new cigar that came out for years.